public class RFIDWithUHFUrxUart2_qcom extends UhfBase implements IRFIDWithUHFUrxUart
UhfBase.ErrorCodeBank_EPC, Bank_RESERVED, Bank_TID, Bank_USER, LockBank_ACCESS, LockBank_EPC, LockBank_KILL, LockBank_TID, LockBank_USER, LockMode_LOCK, LockMode_OPEN, LockMode_PLOCK, LockMode_POPEN, UPDATE_UHF| Modifier and Type | Method and Description |
|---|---|
boolean |
blockWriteData(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData,
int bank,
int ptr,
int cnt,
java.lang.String writeData)
向标签写入数据(支持大数据标签写入)、当需要写入的标签数据比较大可以使用此函数写入
Write data into tag(support big-sized data writing), user could use this function when big-sized data need to be written. |
boolean |
disableBeep()
禁用蜂鸣器
|
boolean |
enableBeep()
启用蜂鸣器
|
boolean |
eraseData(java.lang.String accessPwd,
int bank,
int ptr,
int cnt)
擦除数据，被擦除的数据块其内容将被设置成0.
Data block that has been cleaned will be setup to 0. |
boolean |
eraseData(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData,
int bank,
int ptr,
int cnt)
擦除指定标签的数据，被擦除的数据块其内容将被设置成0.
Clean specific tag data, data block after cleaned will be set to 0. |
boolean |
factoryReset()
还原出厂设置(Restore factory settings)
|
boolean |
free()
关闭UHF模块
Switch OFF UHF module |
java.lang.String |
generateLockCode(java.util.ArrayList<java.lang.Integer> lockBank,
int lockMode)
获取锁定码
Get lock code |
java.util.List<AntennaState> |
getANT()
获取天线
|
java.util.List<AntennaConnectState> |
getAntennaConnectState() |
java.util.List<AntennaPowerEntity> |
getAntennaPower() |
int |
getAntennaPower(AntennaEnum ant)
获取单个天线的功率
|
ConnectionStatus |
getConnectStatus()
获取UHF连接状态
Acquire UHF connection status |
int |
getCW()
获取连续波设置
Acquire CW setup |
ReaderIPEntity |
getDestIP()
获取目标IP
|
InventoryModeEntity |
getEPCAndTIDUserMode()
获取当前设置的盘点模式 (Get the currently set inventory mode)
|
int |
getErrCode() |
int |
getFastInventoryMode()
getFastInventoryMode
|
int |
getFrequencyMode()
读取模块的工作模式
Read work mode of module |
Gen2Entity |
getGen2()
获取GEN2参数值(Get GEN2 parameter value)
|
byte[] |
getInputStatus()
获取输入口状态
|
static RFIDWithUHFUrxUart2_qcom |
getInstance() |
int |
getProtocol()
获取协议
Acquire protocol |
int |
getRFLink()
获取链路参数
acquire link parameter |
java.lang.String |
getSTM32Version() |
int |
getTemperature()
获取模块温度
Acquire module Temperature |
int[] |
getTriggerWorkModePara()
获取触发工作模式参数
|
ReaderIPEntity |
getUhfReaderIP()
获取UHF读写器IP
|
java.lang.String |
getVersion()
读取UHF模块版本号
Read UHF module version |
int |
getWorkMode()
获取工作模式
|
boolean |
init(android.content.Context context)
初始化UHF模块
Initiate UHF module |
UHFTAGInfo |
inventorySingleTag()
单步识别标签
Identify tag in single mode |
boolean |
isEnableBeep()
是否启用蜂鸣器
|
boolean |
isInventorying()
uhf 是否正在盘点
|
boolean |
killTag(java.lang.String killPwd)
销毁指定标签,默认密码(0x00 0x00 0x00 0x00)不能执行销毁
Kill specific tag, default password(0x00 0x00 0x00 0x00) |
boolean |
killTag(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData)
销毁指定标签 ,默认密码(0x00 0x00 0x00 0x00)不能执行销毁
Kill specific tag, default password(0x00 0x00 0x00 0x00) |
boolean |
lockMem(java.lang.String accessPwd,
int bank,
int ptr,
int cnt,
java.lang.String filterData,
java.lang.String lockCode)
锁定指定标签
Lock specific tag |
boolean |
lockMem(java.lang.String accessPwd,
java.lang.String lockCode)
锁定标签
Lock tag |
java.lang.String |
readData(java.lang.String accessPwd,
int bank,
int ptr,
int cnt)
读取标签数据
Read tag data |
java.lang.String |
readData(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData,
int bank,
int ptr,
int cnt)
读取指定标签数据
Read specific tag data |
UHFTAGInfo |
readTagFromBuffer()
Deprecated.
|
boolean |
setANT(java.util.List<AntennaState> antStatus)
设置天线
|
boolean |
setAntennaPower(AntennaEnum ant,
int power)
设置单个天线的功率
|
void |
setConnectionStatusCallback(ConnectionStatusCallback<java.lang.Object> btStatusCallback)
设置UHF连接状态回调
Setup UHF continuous stauts call-back |
boolean |
setCW(int flag)
设置连续波
Setup CW |
boolean |
setDestIP(ReaderIPEntity readerIPEntity)
设置目标IP
|
boolean |
setEPCAndTIDMode()
设置循环盘点同时读取 EPC、TID 模式
Setup auto scan to acquire EPC, TID mode |
boolean |
setEPCAndTIDUserMode(int user_prt,
int user_len)
设置循环盘点同时读取 EPC、TID、USER 模式
Setup auto scan to acquire EPC, TID, User mode |
boolean |
setEPCMode()
设置循环盘点只获取EPC的数据
Setup auto scan to acquire EPC only |
boolean |
setFastID(boolean enalbe)
开关FastID功能
ON/OFF FastID function |
boolean |
setFastInventoryMode(boolean enable)
setFastInventory
|
boolean |
setFilter(int bank,
int ptr,
int cnt,
java.lang.String data)
过滤循环盘点的标签，在
IUHF.startInventoryTag()循环盘点标签之前，可以设置要过滤的数据。Filter tag in auto scan mode, before scanning tags IUHF.startInventoryTag(), setup data that needs to be filtered. |
boolean |
setFreHop(float fre)
设置模块频点
Setup frequency Hop |
boolean |
setFrequencyMode(int freMode)
设置模块的工作模式
Setup work mode of module |
boolean |
setGen2(Gen2Entity entity)
设置GEN2参数值 (Set GEN2 parameter value)
|
void |
setInventoryCallback(IUHFInventoryCallback inventoryCallback)
设置盘点回调接口，接收循环盘点到的标签数据
Set the inventory callback interface to receive the label data from the cyclic inventory 备注：需要在开始循环盘点 IUHF.startInventoryTag()之前调用此方法。Note: This method needs to be called before starting the loop inventory IUHF.startInventoryTag(). |
boolean |
setProtocol(int protocol)
设置协议
Setup protocol |
boolean |
setRelayStatus(byte status)
设置继电器状态
|
boolean |
setRFLink(int mode)
设置链路参数
Setup RFlink |
boolean |
setTagFocus(boolean enalbe)
开关TagFocus功能
ON/OFF TagFocus |
boolean |
setTriggerWorkModePara(int input,
int workTime,
int waitTime,
int receiveMode)
设置触发工作模式参数
|
void |
setUart(java.lang.String uart) |
boolean |
setUhfReaderIP(ReaderIPEntity readerIPEntity)
设置UHF读写器IP
|
boolean |
setWorkMode(int mode)
设置工作模式
|
boolean |
startInventoryTag()
开始循环识别标签。
|
boolean |
startInventoryTag(InventoryParameter inventoryParameter) |
boolean |
stopInventory()
停止循环识别，在调用此函数之后应当退出循环获取缓冲区的标签信息的子线程
Stop auto reading, after call this function to exit sub threads of tag data of buffer. |
boolean |
uhfBlockPermalock(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData,
int ReadLock,
int uBank,
int uPtr,
int uRange,
byte[] uMaskbuf)
数据块操作
|
boolean |
uhfJump2Boot()
uhf进入boot模式 ，开始升级之前需要调用此函数
UHF enter boot mode, need to call this formula before upgrade |
boolean |
uhfJump2Boot(int type)
uhf进入boot模式 ，开始升级之前需要调用此函数
UHF enter boot mode, need to call this formula before upgrade |
boolean |
uhfJump2BootSTM32() |
boolean |
uhfStartUpdate()
开始升级uhf模块
Start upgrade UHF module |
boolean |
uhfStopUpdate()
停止升级uhf模块，uhf模块升级完成后需要调用此函数
Stop upgrade UHF module, call this formula after module has been upgraded. |
boolean |
uhfUpdating(byte[] buff)
升级uhf模块，发送uhf固件数据
Upgrade UHF module, send UHF firmware data |
boolean |
writeData(java.lang.String accessPwd,
int bank,
int ptr,
int cnt,
java.lang.String data)
向标签写入数据
Write data in tag |
boolean |
writeData(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData,
int bank,
int ptr,
int cnt,
java.lang.String writeData)
将数据写入指定标签
Write data |
boolean |
writeDataToEpc(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData,
java.lang.String writeData)
将数据写入到EPC,而且自动适配盘点的EPC长度
Write data to epc |
boolean |
writeDataToEpc(java.lang.String accessPwd,
java.lang.String writeData)
将数据写入到EPC,而且自动适配盘点的EPC长度
Write data to epc |
readTcpServiceState, setEPCAndTIDUserMode, setOnLowBatteryListenerequals, getClass, hashCode, notify, notifyAll, toString, wait, wait, waitsetEPCAndTIDUserModepublic static RFIDWithUHFUrxUart2_qcom getInstance()
public boolean init(android.content.Context context)
IUHFpublic boolean free()
IUHFpublic java.lang.String getVersion()
IUHFgetVersion in interface IUHFpublic int getFrequencyMode()
IUHFgetFrequencyMode in interface IUHFpublic boolean setFrequencyMode(int freMode)
IUHFsetFrequencyMode in interface IUHFfreMode - 0x01：China Standard(840~845MHz) public boolean startInventoryTag()
IUHF开始循环识别标签。
Begin looping through the identification labels.
通过 IUHF.setInventoryCallback(IUHFInventoryCallback inventoryCallback) 这个回调接口获取标签数据，需要在开始盘点之前调用setInventoryCallback方法。
Get the label data through the callback interface IUHF.setInventoryCallback(IUHFInventoryCallback inventoryCallback), you need to call the setInventoryCallback method before starting the inventory.
备注：开启循环识别标签后模块只能响应IUHF.stopInventory()函数 。
Note: The module can only respond to the IUHF.stopInventory() function after the loop identification tag is turned on.
startInventoryTag in interface IUHFpublic boolean startInventoryTag(InventoryParameter inventoryParameter)
startInventoryTag in interface IUHFURxpublic boolean factoryReset()
factoryReset in interface IUHFfactoryReset in interface IUHFURxfactoryReset in class UhfBasepublic boolean setFastInventoryMode(boolean enable)
setFastInventoryMode in interface IUHFsetFastInventoryMode in interface IUHFURxsetFastInventoryMode in class UhfBaseenable - true: FastInventory is enablepublic int getFastInventoryMode()
getFastInventoryMode in interface IUHFgetFastInventoryMode in interface IUHFURxgetFastInventoryMode in class UhfBasepublic UHFTAGInfo readTagFromBuffer()
IUHFIUHF.setInventoryCallback(IUHFInventoryCallback inventoryCallback) instead .readTagFromBuffer in interface IUHFpublic ConnectionStatus getConnectStatus()
IUHFgetConnectStatus in interface IUHFgetConnectStatus in class UhfBasepublic boolean isInventorying()
IUHFisInventorying in interface IUHFisInventorying in class UhfBasepublic void setInventoryCallback(IUHFInventoryCallback inventoryCallback)
IUHFIUHF.startInventoryTag()之前调用此方法。IUHF.startInventoryTag().setInventoryCallback in interface IUHFinventoryCallback - 盘点回调接口(inventory callback interface)public boolean stopInventory()
IUHFstopInventory in interface IUHFstopInventory in class UhfBasepublic java.lang.String generateLockCode(java.util.ArrayList<java.lang.Integer> lockBank,
int lockMode)
IUHFgenerateLockCode in interface IUHFlockBank - 要锁定的区域 (lockBank areas that need to lock ): IUHF.LockBank_KILLIUHF.LockBank_ACCESSIUHF.LockBank_TIDIUHF.LockBank_USERIUHF.LockBank_EPClockMode - 锁定的模式(lockMode lock modes):IUHF.LockMode_LOCKIUHF.LockMode_OPENIUHF.LockMode_PLOCKIUHF.LockMode_POPENpublic boolean lockMem(java.lang.String accessPwd,
int bank,
int ptr,
int cnt,
java.lang.String filterData,
java.lang.String lockCode)
IUHFlockMem in interface IUHFaccessPwd - ACCESS PASSWORD (4 bites)bank - 标签的存储区(memory area):IUHF.Bank_RESERVED、IUHF.Bank_EPC、IUHF.Bank_TID、IUHF.Bank_USERptr - 过滤起始地址,单位:bit (Filter start address,unit:bit)cnt - 过滤数据长度(单位:bit),当过滤的数据长度为0时，表示无过滤。 (Filter data length(unit:bit) when filter length is 0, it means no filter.)filterData - 过滤数据(Filter data)lockCode - 锁定码 (Lock Code)public boolean lockMem(java.lang.String accessPwd,
java.lang.String lockCode)
IUHFpublic UHFTAGInfo inventorySingleTag()
IUHFinventorySingleTag in interface IUHFpublic java.lang.String readData(java.lang.String accessPwd,
int bank,
int ptr,
int cnt)
IUHFreadData in interface IUHFaccessPwd - Access passwordbank - 读取的存储区(read storage area): IUHF.Bank_RESERVED、IUHF.Bank_EPC、IUHF.Bank_TID、IUHF.Bank_USERptr - 读取的起始地址(单位:字) (read start address(unit: word))cnt - 读取的数据长度(单位:字) (read data length(unit: word))public java.lang.String readData(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData,
int bank,
int ptr,
int cnt)
IUHFreadData in interface IUHFaccessPwd - ACCESS PASSWORD (4 bites)filterBank - 过滤的存储区(Filtered storage area ): IUHF.Bank_EPC、IUHF.Bank_TID、IUHF.Bank_USERfilterPtr - 过滤的起始地址(Filter start address)filterCnt - 过滤数据长度(单位:bit),当过滤的数据长度为0时，表示无过滤 ( Filter data length(unit:bit), when filter data length is 0, it means no filter.)filterData - 过滤的数据(Filtered data)bank - 读取的存储区(Read storage area) IUHF.Bank_RESERVED、IUHF.Bank_EPC、IUHF.Bank_TID、IUHF.Bank_USERptr - 读取的起始地址(单位:字) (read start address(unit: word))cnt - 读取的数据长度(单位:字) (read data length(unit: word))public boolean writeData(java.lang.String accessPwd,
int bank,
int ptr,
int cnt,
java.lang.String data)
IUHFwriteData in interface IUHFaccessPwd - ACCESS PASSWORD (4 bites)bank - 标签的存储区(Storage area):IUHF.Bank_RESERVED、IUHF.Bank_EPC、IUHF.Bank_TID、IUHF.Bank_USERptr - 起始地址的偏移量(start address(unit: word))cnt - 数据的长度（Word为单位，不能为0）(Data length(Word is unit, cannot be 0))data - 要写入的数据,十六进制格式 (Data format should be hexvalue)public boolean writeData(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData,
int bank,
int ptr,
int cnt,
java.lang.String writeData)
IUHFwriteData in interface IUHFaccessPwd - ACCESS PASSWORD (4 bites)filterBank - 过滤的存储区(Filtered storage area ): IUHF.Bank_EPC、IUHF.Bank_TID、IUHF.Bank_USERfilterPtr - 过滤的起始地址(Filter start address)filterCnt - 过滤数据长度(单位:bit),当过滤的数据长度为0时，表示无过滤 ( Filter data length(unit:bit), when filter data length is 0, it means no filter.)filterData - 过滤的数据(Filtered data)bank - 标签的存储区(Storage area): IUHF.Bank_RESERVED、IUHF.Bank_EPC、IUHF.Bank_TID、IUHF.Bank_USERptr - 起始地址的偏移量(start address(unit: word))cnt - 数据的长度（Word为单位，不能为0）(Data length(Word is unit, cannot be 0))writeData - 要写入的数据,十六进制格式 (Data format should be hexvalue)public boolean writeDataToEpc(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData,
java.lang.String writeData)
IUHFwriteDataToEpc in interface IUHFaccessPwd - ACCESS PASSWORD (4 bites)filterBank - 过滤的存储区(Filtered storage area ): IUHF.Bank_EPC、IUHF.Bank_TID、IUHF.Bank_USERfilterPtr - 过滤的起始地址(Filter start address)filterCnt - 过滤数据长度(单位:bit),当过滤的数据长度为0时，表示无过滤 ( Filter data length(unit:bit), when filter data length is 0, it means no filter.)filterData - 过滤的数据(Filtered data)writeData - 要写入的数据,十六进制格式 (Data format should be hexvalue)public boolean writeDataToEpc(java.lang.String accessPwd,
java.lang.String writeData)
IUHFwriteDataToEpc in interface IUHFaccessPwd - ACCESS PASSWORD (4 bites)writeData - 要写入的数据,十六进制格式 (Data format should be hexvalue)public boolean blockWriteData(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData,
int bank,
int ptr,
int cnt,
java.lang.String writeData)
IUHFblockWriteData in interface IUHFaccessPwd - ACCESS PASSWORD (4 bites)filterBank - 过滤的存储区(Filtered storage area ): IUHF.Bank_EPC、IUHF.Bank_TID、IUHF.Bank_USERfilterPtr - 过滤的起始地址(Filter start address)filterCnt - 过滤数据长度(单位:bit),当过滤的数据长度为0时，表示无过滤 ( Filter data length(unit:bit), when filter data length is 0, it means no filter.)filterData - 过滤的数据(Filtered data)bank - 标签的存储区(Storage area): IUHF.Bank_RESERVED、IUHF.Bank_EPC、IUHF.Bank_TID、IUHF.Bank_USERptr - 起始地址的偏移量(start address(unit: word))cnt - 数据的长度（Word为单位，不能为0）(Data length(Word is unit, cannot be 0))writeData - 要写入的数据,十六进制格式 (Data format should be hexvalue)public boolean eraseData(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData,
int bank,
int ptr,
int cnt)
IUHFeraseData in interface IUHFaccessPwd - ACCESS PASSWORD (4 bites)filterBank - 过滤的存储区(Filtered storage area ):IUHF.Bank_EPC、IUHF.Bank_TID、IUHF.Bank_USERfilterPtr - 过滤的起始地址(Filter start address)filterCnt - 过滤数据长度(单位:bit),当过滤的数据长度为0时，表示无过滤 ( Filter data length(unit:bit), when filter data length is 0, it means no filter.)filterData - 过滤的数据(Filtered data)bank - 擦除的数据区域(Cleaned data block):IUHF.Bank_RESERVED、 IUHF.Bank_EPC、IUHF.Bank_TID、IUHF.Bank_USERptr - 擦除的起始地址(单位:字) (Cleaned start address(Unit: word))cnt - 擦除的数据长度(单位:字) (Cleaned data length(Unit: word))public boolean eraseData(java.lang.String accessPwd,
int bank,
int ptr,
int cnt)
IUHFeraseData in interface IUHFaccessPwd - ACCESS PASSWORD (4 bites)bank - 擦除的数据区域(Cleaned data block):IUHF.Bank_RESERVED、 IUHF.Bank_EPC、IUHF.Bank_TID、IUHF.Bank_USERptr - 擦除的起始地址(单位:字) (Cleaned start address(Unit: word))cnt - 擦除的数据长度(单位:字) (Cleaned data length(Unit: word))public boolean setFilter(int bank,
int ptr,
int cnt,
java.lang.String data)
IUHFIUHF.startInventoryTag()循环盘点标签之前，可以设置要过滤的数据。IUHF.startInventoryTag(), setup data that needs to be filtered.setFilter in interface IUHFbank - 过滤的存储区(Filtered storage area ): IUHF.Bank_EPC、IUHF.Bank_TID、IUHF.Bank_USERptr - 过滤的起始地址(Filter start address)cnt - 过滤数据长度(单位:bit),当过滤的数据长度为0时，表示无过滤 ( Filter data length(unit:bit), when filter data length is 0, it means no filter.)data - 过滤的数据(Filtered data)public boolean killTag(java.lang.String killPwd)
IUHFpublic boolean killTag(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData)
IUHFkillTag in interface IUHFaccessPwd - 销毁密码(Kill password)filterBank - 过滤的存储区(Filtered storage area ):IUHF.Bank_EPC、IUHF.Bank_TID、IUHF.Bank_USERfilterPtr - 过滤的起始地址(Filter start address)filterCnt - 过滤数据长度(单位:bit),当过滤的数据长度为0时，表示无过滤 ( Filter data length(unit:bit), when filter data length is 0, it means no filter.)filterData - 过滤的数据(Filtered data)public boolean setProtocol(int protocol)
IUHFsetProtocol in interface IUHFprotocol - 0x00： ISO18000-6C public int getProtocol()
IUHFgetProtocol in interface IUHFpublic boolean setFreHop(float fre)
IUHFpublic boolean setRFLink(int mode)
IUHFsetRFLink in interface IUHFmode - 0-PR ASK/Miller8/160KHz public int getRFLink()
IUHFpublic boolean setFastID(boolean enalbe)
IUHFpublic boolean setTagFocus(boolean enalbe)
IUHFsetTagFocus in interface IUHFenalbe - true：开(on)，false：关(off)public boolean setEPCMode()
IUHFsetEPCMode in interface IUHFpublic boolean setEPCAndTIDMode()
IUHFsetEPCAndTIDMode in interface IUHFpublic boolean setEPCAndTIDUserMode(int user_prt,
int user_len)
IUHFsetEPCAndTIDUserMode in interface IUHFuser_prt - USER区起始地址(Start addressin USER area)user_len - USER区长度(Data length in USER area)public InventoryModeEntity getEPCAndTIDUserMode()
IUHFgetEPCAndTIDUserMode in interface IUHFpublic int getTemperature()
IUHFgetTemperature in interface IUHFpublic boolean setGen2(Gen2Entity entity)
IUHFpublic Gen2Entity getGen2()
IUHFpublic boolean uhfJump2Boot()
IUHFuhfJump2Boot in interface IUHFpublic boolean uhfJump2Boot(int type)
IUHFuhfJump2Boot in interface IUHFtype - 0,upgrade reader mainboard
1,upgrade UHF module
2,upgrade reader bootloader
3,upgrade Ex10 SDK firmwarepublic boolean uhfStartUpdate()
IUHFuhfStartUpdate in interface IUHFpublic boolean uhfUpdating(byte[] buff)
IUHFuhfUpdating in interface IUHFbuff - 固件数据(buff firmware data)public boolean uhfStopUpdate()
IUHFuhfStopUpdate in interface IUHFpublic void setConnectionStatusCallback(ConnectionStatusCallback<java.lang.Object> btStatusCallback)
IUHFsetConnectionStatusCallback in interface IUHFbtStatusCallback - 回调接口(Callback interface)public boolean enableBeep()
IUHFURxenableBeep in interface IUHFURxpublic boolean disableBeep()
IUHFURxdisableBeep in interface IUHFURxpublic boolean isEnableBeep()
IUHFURxisEnableBeep in interface IUHFURxpublic boolean setUhfReaderIP(ReaderIPEntity readerIPEntity)
IUHFURxsetUhfReaderIP in interface IUHFURxreaderIPEntity - 读写器IP地址public ReaderIPEntity getUhfReaderIP()
IUHFURxgetUhfReaderIP in interface IUHFURxpublic ReaderIPEntity getDestIP()
IUHFURxpublic boolean setDestIP(ReaderIPEntity readerIPEntity)
IUHFURxpublic boolean setANT(java.util.List<AntennaState> antStatus)
IUHFURxsetANT in interface IMultipleAntennasetANT in interface IUHFURxantStatus - 下标[0]:天线1的状态值, 下标[1]:天线2的状态值, 下标[2]:天线3的状态 值, 下标[3]:天线4的状态值 ; 状态值的含义：1表示使用当前天线，0表示不使用当前天线。public java.util.List<AntennaState> getANT()
IUHFURxgetANT in interface IMultipleAntennagetANT in interface IUHFURxpublic boolean setAntennaPower(AntennaEnum ant, int power)
IMultipleAntennasetAntennaPower in interface IMultipleAntennaant - 天线号power - 功率public int getAntennaPower(AntennaEnum ant)
IMultipleAntennagetAntennaPower in interface IMultipleAntennapublic java.util.List<AntennaPowerEntity> getAntennaPower()
getAntennaPower in interface IMultipleAntennapublic int getWorkMode()
IUHFURxgetWorkMode in interface IUHFURxpublic boolean setWorkMode(int mode)
IUHFURxsetWorkMode in interface IUHFURxmode - 0:表示命令模式,1:表示自动模式，2：表示触发模式public boolean setTriggerWorkModePara(int input,
int workTime,
int waitTime,
int receiveMode)
IUHFURxsetTriggerWorkModePara in interface IUHFURxinput - 触发IO,0x00表示触发输入1; 0x01表示触发输入2workTime - 触发工作时间,表示有触发输入时读卡工作时间，单位是10mswaitTime - 触发时间间隔,表示触发工作时间结束后,间隔多久再判断触发输入IO口进行触发,单位是10msreceiveMode - 标签输出方式,0x00表示串口输出，0x01表示UDP输出。public int[] getTriggerWorkModePara()
IUHFURxgetTriggerWorkModePara in interface IUHFURxpublic byte[] getInputStatus()
IUHFURxgetInputStatus in interface IUHFURxpublic boolean setRelayStatus(byte status)
IUHFURxsetRelayStatus in interface IUHFURxstatus - 0:断开，1:闭合public boolean uhfJump2BootSTM32()
uhfJump2BootSTM32 in interface IUHFURxpublic java.lang.String getSTM32Version()
getSTM32Version in interface IUHFURxpublic java.util.List<AntennaConnectState> getAntennaConnectState()
getAntennaConnectState in interface IUHFURxpublic void setUart(java.lang.String uart)
setUart in interface IRFIDWithUHFUrxUartpublic boolean uhfBlockPermalock(java.lang.String accessPwd,
int filterBank,
int filterPtr,
int filterCnt,
java.lang.String filterData,
int ReadLock,
int uBank,
int uPtr,
int uRange,
byte[] uMaskbuf)
IUHFuhfBlockPermalock in interface IUHFaccessPwd - ACCESS PASSWORD (4 bites)filterBank - 过滤的存储区(Filtered storage area ):IUHF.Bank_EPC、IUHF.Bank_TID、IUHF.Bank_USERfilterPtr - 过滤的起始地址(Filter start address)filterCnt - 过滤数据长度(单位:bit),当过滤的数据长度为0时，表示无过滤 ( Filter data length(unit:bit), when filter data length is 0, it means no filter.)filterData - 过滤的数据(Filtered data)public boolean setCW(int flag)
IUHFpublic int getCW()
IUHFpublic int getErrCode()
getErrCode in interface IUHFURx